HALFEN Body Anchor
HALFEN body anchors are natural stone fixings, adjustable in three dimensions for doweling. They absorb both the slab weight and wind loads.
The product range Body BA covers cantilevers from 60-160 mm, with an allowable load of up to 800 N. The product range Body DT range is suitable for cantilevers from 140-240 mm and can take loads of up to 1.300 N.
With the Body DT using the patented clamping bolt a vertical adjustment to the facade can be made when the slab is already set.
The base of the Body DT anchor is supplied completely pre-assembled with the “driven wedge disk”. Restraint ties of the Body DH product range for anchoring in the vertical joints are available ex stock.
Quality features are:
- cantilevers from 60 - 240 mm with loads up to 1300 N as standard versions
- adjustable in three directions
- immediate load-bearing capacities
- patented: wedge disk and clamping bolts
- used in horizontal and vertical joints
HALFEN Sub Structure
Adjustable suspended channel system with support and retaining anchors that are continuously variable in height, for wall distances >= 160 mm.
Ideal for new buildings and refurbishments. Particularly suited for natural stone façades with large and varying distances to the load-bearing wall.
Few anchoring points facilitate a speedy mounting of the stainless steel substructure and thus also a quick installation of the natural stone slabs.
Quality features are:
- stainless steel 1.4571/1.4401 AISI 316 (A4)
- easy to install
- few, uncomplicated components
- fastening on ceilings, ceiling joints or concrete walls spaced approx. 3.0 m apart (height between floors)
- adjustable fastening on HALFEN channels
- rigid fastening with dowels
|